Balusters
A vertical stair part turned, carved or otherwise vertical section placed between the handrail and the stair tread or stair stringer. Balusters are typically spaced no more than 4" apart. Most balusters in wrought iron are 44" tall. Most wood balusters are 42" tall.< Back to top
Balustrade
A stair system including the framework of rail, newels and balusters. The system is designed to flow together from like components.< Back to top
Banister
The banister refers to the system of parts that combine to make the stairway. A banister is usually the combination of handrail, newels, stair treads, balusters and assorted trim pieces. A banister is installed by stair professionals, trim carpenters or skilled do it yourselfers. A stair banister will be the focal point of a home and should be planned and installed carefully. The stair banister provides the functional purposes of safety and assistance when climbing the stair banister. A banister should contain parts that are strong enough to support the weight of adults leaning against them and spaced close enough that infants cannot get their heads lodged between the vertical elements in the banister.< Back to top
Brackets
Ornamental pieces used on the skirt boards and stair stringers. Several different variations exists from carved to scrolled. Typically they are ¼" thick and made from the same wood species as the rest of the stair system.< Back to top
Box
Straight stairs with closed stringers as opposed to an open stairs where the tread hangs over the skirtboard with a return.< Back to top
Bull nose
A rounded front to a board. Sometimes referring to the landing tread or piece of trim applied to the floor on balcony areas where the balusters are attached.< Back to top
Bull nosed starting tread
Starting step. Sometimes called a scroll step. The first step of a stair system. The ends of the tread project beyond the skirt boards The ends are semicircular in shape.< Back to top
Carriages
Stringers, Cut Jacks, Jacks, Frame, Rough Carriage. The angled pieces used to support the stair system and a for the treads to rest upon.< Back to top
Cove moulding
Moulding placed under the treads and landing treads, typically ½" x 5/8".< Back to top
Closed Stringers
A staircase in which the ends of the treads are not visible to the outside. The opposite is an open stairs. Same as a box stair.< Back to top
Code
The rules adopted by a state or local authorities that govern how a stairway must be put together for safety reasons.< Back to top
Curved
Stairs that curve as they ascend.< Back to top
Cut Jacks
Notched stringers that support stair treads.< Back to top
Dogleg
A stair with two flights separated by a half landing, and having no stairwell.< Back to top
Easing
The curved junctions placed in a handrail to bring the parts at different levels into one flowing curve. A fitting that curves in a vertical plane, used to change the angle of the handrail.< Back to top
Epoxy
A two part adhesive used to bond materials from wood to composites to metals. Epoxies are especially useful in bonding metal to wood in stair applications. Epoxies vary in strength, setting time and elasticity once cured.< Back to top
False end treads
A less expensive option when using carpet on a stair tread. False treads come in a kit with a plywood riser and plywood tread which receives a nosing that is attached to the face and the side. False end treads when covered with carpet look like solid treads and are less expensive than a solid wood tread. Often called a false tread kit.< Back to top
Fillet
A thin strip that fills the plowed (grooved) rail space between balusters in a hand rail or shoe rail.< Back to top
Finial
The ornamental top of a newel post. Usually turned, sometimes carved. Box newels often receive an optional finial.< Back to top
Fittings
Pieces of wood that are shaped with the same profile as handrail to form changes of direction for the handrail or to provide strength and ornamentation. Example fittings are volutes, turn outs, tandem caps, easings and goosenecks.< Back to top
Flight of stairs
An uninterrupted series of steps and stringers reaching from one landing to the next. A flight may be straight or curved.< Back to top
Flitch
A log sliced into thin veneer pieces, usually 1/16" thickness, slices are then bundled back to sell as a unit.< Back to top
Flutes
Flutes are decorative vertical grooves placed in a wood surface such as balusters or newels.< Back to top
Going
Run; the horizontal distance between two successive nosings. The sum of the goings of a straight flight stair is the going of the flight.< Back to top
Gradient of a stair
The ratio between going (run) and riser; the angle of inclination.< Back to top
Guardrail
A protective railing designed to prevent people or objects from falling into an open well, stairwell or other open spaces.< Back to top
Glue blocks
Blocks of wood attached to the underside of a stair at the junction of the riser and tread. Glue blocks secure the treads and risers together and are used to prevent movement which causes squeaks.< Back to top
Gooseneck
A combination of an easing and a fitting in a rail system which allows the handrail to change heights from an incline back to the level. Placed at landings or at the top of a stair.< Back to top
Handing
The direction a stair part is designed to be used. Handing is right or left. Handing is determined by standing at the bottom of the stairs and looking up.< Back to top
Handrail
A molded rail following the pitch or rake of the staircase, and forming the top or connecting piece of the balustrade which protects the outside of the stair.< Back to top
Headroom
The vertical distance from the lowest point of the ceiling or soffit directly above the stair to the nose of the stair Most code require 6'-8", (80 in), (2.03 m), (203 cm).< Back to top
Horse
The stringer for the staircase usually notched.< Back to top
Jatoba
The technical name for Brazilian Cherry.< Back to top
Jack
Shortened term for stringer or supporting member of the staircase.< Back to top
Landing
A resting place, or wide step at the middle or top of a flight of stairs. Landings are often used to change the direction of a stair.< Back to top
Margin
Reveal; the distance between the nosing and the top of a closed stringer.< Back to top
Mopstick handrail
A handrail that is circular except for a small flat surface underneath.< Back to top
Mitered Risers
A method of joining the riser to the skirtboard. The mitered method is when the skirtboard and riser are both mitered to each other.< Back to top
Newels or newel post
A solid rectangular, or circular section of vertical post at the center and at regular turns and junctions of a rail system. The newels provide the main support for the rail system. There is a starting newel at the base of the stairs and a landing newel at the turns or top of the stair. Other newels are described as: center turned newel, box newel or a pin top newel.< Back to top
Nosing
The front edge of the tread which projects beyond the face of the riser. It is usually rounded, chamfered or sometimes shaped.< Back to top
Open Risers
A staircase designed with only the horizontal surfaces of the treads fixed to the stair stringers. Vertical surfaces between treads are open. This type of stair system does not meet most code requirements. If the riser space is less than 4" then it will meet some code requirements.< Back to top
Open stair
A stair that is open or without a wall on one or both sides.< Back to top
Open Stringer
A stringer or skirt board that is cut out for the treads and risers. Typically the tread will have a return that hangs over the skirtboard to finish the look.< Back to top
Opening cap
A fitting or portion of the rail system which begins with a round cap and is connected to the handrail.< Back to top
Open well stair
A stair with two or more flights around an open space.< Back to top
Perron
A dignified exterior stairway, usually approaching the main entrance.< Back to top
Pin top baluster
A baluster having dowel type top rather than a square. This type of baluster is attached to the handrail by drilling a hole into the handrail and inserting the top of the baluster into the handrail and gluing them into place.< Back to top
Pitch
The angle.< Back to top
Plowed rail
A hand rail which has had the bottom grooved or plowed to accommodate a square top baluster. Fillet are used to fill the space between balusters.< Back to top
Posts
See newels.< Back to top
Quarter turn fitting
A machined block of wood that matches the handrail and allows a 90 degree change of direction. The fitting may have a round cap to accommodate the a newel or it may be the same width as the handrail and make the turn without the elongation need to accommodate a newel.< Back to top
Rail system
The balustrade. Used to describe a complete rail system consisting of the handrail, newels, fittings and balusters.< Back to top
Rake
Describes the angled part of a stairway as opposed to a balcony.< Back to top
Ramp
A vertical curved easing in a handrail.< Back to top
Rise
The vertical distance between the upper surfaces of two consecutive treads.< Back to top
Risers
The vertical face of a step.< Back to top
Shoe rail
A plowed rail that is used to accept the bottom end of square balusters. The shoe rail often sits on a short wall or it may float above the treads.< Back to top
Soffit
The visible sloping under-surface between the stair stringers.< Back to top
Spindles
The balusters or turned, carved or otherwise vertical sections placed between the handrail and the stair tread or stair stringer.< Back to top
Spiral Stairs
Stairs, which rise regularly around a cylinder or elongated cylinder either real or imaginary. Sometimes called helical stairs.< Back to top
Step
One unit of a stair, consisting of a riser and a tread. A stair is a series of steps.< Back to top
Square top baluster
Balusters with square tops rather than the more commonly used pin tops. Square top balusters require plowed rail and fillets.< Back to top
Starting tread (step)
The first tread and riser at the bottom of the stair. Starting steps are usually rounded on the ends to accept volutes or turn outs.< Back to top
Stairway
A staircase, or a stairwell.< Back to top
Stairwell
The framed opening in the floor that incorporates the stairs.< Back to top
Stringer
(Carriages, Cut Jacks,) The inclined boards or laminations in which the treads and risers are attached. Stringers provide the support for the stairs.< Back to top
Tandem cap
A fitting that matches the handrail profile with a round enlarged portion in the middle designed to accommodate a newel.< Back to top
Toe rail
see shoe rail.< Back to top
Treads
The horizontal part of a staircase upon which the foot is placed.< Back to top
Turn out
A fitting used to start a rail system. The turn out flares left or right slightly to give the appearance that the stairway is enlarged and inviting.< Back to top
Veneer
A thin sliced wood used to cover wood. Veneer is often used in tread ends and stair stringers.< Back to top
Volutes
Or Wreath - A decorative way to start a stairway. The volute is round with a newel in the center surrounded by balusters and ascending to the rake of the handrail.< Back to top
Wall Rail
Used where a stair runs alongside a wall and is attached to the wall with rail brackets.< Back to top
Walk line
An arbitrary line but generally 12" from the inside radius of a curved stair. The walk line is used in code determination for stairs with a tight radius.< Back to top
Wedges
Ramp type pieces of wood used in the construction of closed staircases to help secure treads and risers.< Back to top
Winders
Treads that are narrower at one end than the other. Used to turn corners or go around curves.< Back to top