VR334 - Wood Insert Sleeve

Wood Insert Sleeve – VR334

Clear
Ships in approx: 1 Day

Product Description

The Wood Insert Sleeve is used to cover the hole wherever cable exits a wood or vinyl post on a level run, creating a clean look. These sleeves are necessary in some applications where the cable leaves a post at an angle (i.e. turning multiple post corners, etc.). With the beauty of 316 stainless steel, the Wood Insert Sleeve brings a look of elegance to any Viewrail cable railing system. The Wood Insert Sleeve (VR334) can be found in the Wood Level Tension Kit (VR295).

Installation Guide

Cable Railing Kit Instructions Booklet

Completed Projects

This product has been used in the following "Completed Projects"

    Product Q&A


    Guest
    Brian Welch
    2 years 6 months ago

    What diameter hole needs to be drilled in a wood post to accept the Wood Insert Sleeve (VR334)?

    Support
    2 years 6 months ago

    Hi Brian,
    You need to drill a 1/2″ hole the wood post to get this to fit correctly.
    Please let us know if you have any other questions.

    Guest
    Bahama Rigging
    2 years 3 months ago

    What is the inside diameter.

    Support
    2 years 3 months ago

    Hi,
    The diameter of the center hole is 0.17″, which is just slightly larger than the outside diameter of our 5/32″ cable. Please let us know if you have any other questions.

    Guest
    Ralph Quin
    2 years 19 days ago

    What is vertical spacing requirements for post

    Support
    2 years 19 days ago

    Thank you for your question, Ralph. In relation to our cable rail posts, we recommend spacing placement to be not more than 48″. If we can assist you with anything further, please let us know.