Product Description

Epoxy Dual Cartridges EPC-410.

Our epoxy is designed specifically to adhere metal to wood. In addition it’s formulated thicker than most epoxy so that it’s less likely to run down the baluster as you’re putting epoxy in the top hole. For more information see our Iron Baluster Installation Guide.

We recommend purchasing 1 tube of epoxy for every 20 iron balusters you need to install. On orders over 100 balusters we recommend purchasing one additional to ensure you don’t run out. Each epoxy cartridge comes with 2 mixing tips.

Reviews

There are no reviews yet.

Be the first to review “EPC-410 Epoxy Cartridge”

Product Q&A


Guest
Marty Holbrook
1 year 1 month ago

Will these fit my COX M25 25 ml Epoxy Applicator?

Support
1 year 1 month ago

Hi Marty,
I don’t know for sure because I’m not familiar with that item. But based on the picture from the image search I did, I would guess that yes it would work. But if you want to be positive you can always purchase our epoxy gun.

Guest
Chuck
7 months 23 days ago

Will the epoxy last if sealed? I’m doing my hand rails in stages and just wondered if it could be sealed to be reused

Support
7 months 22 days ago

Thank you for your question, Chuck. Yes. The Epoxy will last if sealed. If there is a delay during your installation, you would be required to change the tip only.

Guest
Dave
2 months 3 days ago

Application is for filling void around iron ballusters placed 1 1/2″ into drilled oak wood. Loctite Powergrab was used during initial installation and I left about a 1/4″ empty void at the surface. Problem is the railing is flexing due to what I perceive as an adhesive that is slightly flexiable. So I’m looking for an epoxy that can be used to fill the void and thus preventing the flex that is occuring within the hole. Once hardened is the dried epoxy brittle and subject to stess cracking as a result of the railing getting bumped? is this a clear epoxy and can it be stained? Painted? Pen touch up tool to match oak grain finish of wood?
Thank You.
Dave

Support
1 month 25 days ago

Hi Dave,
I don’t believe 1/4″ of our epoxy is going to be strong enough to reduce the flexing in your current installation. I don’t believe the epoxy becomes brittle once installed. The epoxy isn’t totally clear, it’s more of a milky white color. You could paint it, I don’t think you could stain it.
Sorry if I wasn’t able to fully answer your questions. Please let us know if there is any other way we can assist you.

 

May We Also Suggest: